Huki · Surfski
Huki S1-A
Short 18ft4in, narrow 16in (40.6cm) single-well race hull scaled down for lightweight paddlers, with a high bow to resist pearling. Flat-water and rough-water capable; adjustable-response rudder system.
- Length
- 5.59 m
- Beam
- 40.6 cm
- Deck
- 33.5 cm
- Lightest
- 8.1 kg
Specifications
- Length
- 5.59 m
- Beam
- 40.6 cm
- Deck height
- 33.5 cm (est.)
- Category
- Surfski
- Usually paddled by
- Racers
- New price
- Not listed new
Layup weights
On-water profile
Modelled from published beam, length and deck height. Low confidence. Speed is our rating. Both are given at the hull's own design weight.
Stability here means how steady the ski feels sitting still on flat water. Where two craft have overlapping ranges, we can't say which is more stable. Downwind handling is a separate thing, covered in the evidence note below.
Evidence note
Suits: Flatwater and rough-water racing for lightweight paddlers (roughly under ~68kg).
Paddler weight
The estimated sweet spot is 63–73 kg, with a broader estimated guide of 51–73 kg. This estimate is a guide, not a limit. Seat fit, conditions and paddling style matter. Lighter paddlers can still enjoy a larger hull, especially downwind. A test paddle is the best check.
The upper limit is the maker’s; the lighter end follows the proportions of makers’ own ranges. How this is worked out.
Generations
Huki's first-ever surfski, designed by John Dixon (co-designer of the Epic V10). Short elite race ski sized for light/small paddlers. Custom hand-built to order; still catalogued.
Pros and cons
Pros
- Sized for light/small paddlers (<150lb) other elite skis don't fit
- Very light: ~8.1kg in carbon/kevlar
- High bow resists pearling
Cons
- Too small and tippy for average-size adults
- Niche fit, thin resale market
- US custom-order, import to Australia
What paddlers say
huki.com: 'Perfect for experienced racers weighing in at less than 150 Lbs... 160 pound paddlers do quite well in the S1-A' (huki.com).Reported experience
surfski.info (Dave Jensen): the S1-A was Huki's initial surfski, designed by John Dixon, co-designer of the Epic V10 (surfski.info).Reported experience
Gallery


Where to buy
We don't have a dealer listed for Huki yet. All makers and dealers.
Custom order in USD, priced by layup; carbon/kevlar is the lightest/most expensive build. Comparable to other Huki S1 singles (S1-X carbon/kevlar ~$4,830, 2012 ref). No AU dealer: US import only.



